Your 7-in-1 NFL Universal Remote® will fulfill all of your remote control needs. This universal remote can control two televisions, a VCR player, a DVD player, a cable or satellite box, a receiver or AMP, and your AUX box. There are three different methods to program your remote to all of your devices: manual search mode, quick search mode and auto search mode. MANUAL SEARCH MODE
How to Use
list, follow these steps.
First press and hold the SET and POWER buttons until the LED turns on.
TV2, VCR, CATV, DVD, RCVR
Then press the device key (TV1, or AUX) that you wish to program. The LED will flash once. Then using the number buttons, enter the three-digit code for your device. After entering each button, the LED will flash once. Then press the ENTERbutton to store the code number.
code list for your manufacturer. QUICK SEARCH MODE
IF NO KEY ON YOUR REMOTE IS PRESSED FOR 10 SECONDS, YOU NEED TO RESTART THE PROGRAMMING STEPS.
To program your remote under Quick Search Mode, first turn on the device you wish to program and point the remote toward it. Then press and hold the SET and POWER buttons until the LED turns on. Then press thedevice key (TV1, TV2, VCR, CATV, DVD, RCVR or AUX) that you wish to program. The LED will flash once.
hundred times to find the correct code. AUTO SEARCH MODE To program your remote in Auto Search Mode, first turn on the device you wish to program and point the remote toward it.
7-In-1 NFL UNIVERSAL REMOTE®
ongratulations on your purchase of 7-in-1 NFL Universal Remote®! The 7-in-1 NFLUniversal Remote® puts all the convenience of a universal remote into the comfort and feel of a real football and is easy to use. Before starting, please read this manual thoroughly, especially noting safety, care and battery information. Keep this manual for reference. Caution: Do not throw or toss your remote. Throwing it could cause injury.
© 2006 NFL Properties LLC. Team names and logos artrademarks of the teams indicated. All other (NFL-related marks) are trademarks of the National Football League.
The legendary King Arthur brandished a magic sword, Excalibur, from which we take our company name. With this unique weapon in his hands, he could not be vanquished. Although Excalibur Electronics can’t claim the magical secrets of Merlin, King Arthur ’s court wizard, sometimes our patentedtechnology may make it seem as if we could. We make you think!
To program your remote under Manual Search Mode, first look up the three-digit code for your device in the “Device Codes” section of this manual. There may be several codes listed for your TV’s manufacturer. If your device is not listed, try searching under Quick Search Mode or Auto Search Mode. Once you’ve found your device inthe
If the code has been entered correctly, the LED will flash three times and then turn off. Otherwise, if it doesn’t flash three times, you need to repeat all of the previous steps. To test the code, point the football at the TV and press the power button. If the TV turns on or off, the correct code has been programmed. If your TV does not turn on or off, try the next code on the
Then pressand hold the SET and POWER buttons until the LED turns on.
YOU MUST POINT THE REMOTE AT THE DEVICE WHILE PUTTING IT IN MANUAL SEARCH MODE.
Then press the CH+ button followed by the POWER button to test if the code matches the device. Each time you press CH+, a new code is sent to your TV. When your TV turns off, STOP. You have found the right code. Do not hit the CH+ key again. Press ENTERto save the code. Press the POWER key to verify that the TV turns on and off. Please be patient. Your remote is searching through all of the codes and you may need to press CH+ and POWER more than a
Then press the device key (TV1, TV2, VCR, CATV, DVD, RCVR or AUX) that you wish to program. The LED will flash once. Then hold the POWER button for about two seconds until the LED turns on....
Lire le document complet
Veuillez vous inscrire pour avoir accès au document.